punkty na rapidshare, megaupload.

[kajtekjr]

Kod: Zaznacz wszystko

RapidPoints:   44059    Used storage:   235934 MB

[Meru]

Ta na własny użytek i 0 Ref mam

[Robert]

Ale rapid kombinuje z tymi pkt, teraz są jakieś free rapidpoints i premium rapidpoints, nie da się stworzyć konta bo coś zmieniają itd....

Nowe info:

Kod: Zaznacz wszystko

- There are 1 Premium Rapid Point per 100 MB of premium traffic.
[one point per 1 Premium Premium traffic 100MB]
- Traffic during Happy Hours will be calculated proportionately.
[traffic during happy hour is counted proportionately]
- 2000 Rapid Premium Points in 1 ReferrerPoint can be converted.
[you can change 2000 Premium points into 1 reffererpoint]
- Rapid Premium Points can also be (expected 1:1) in Freeport, rapid points to convert.
[exchange premium free rapidshare points into point presumambly 1:1]
- Rapid disbursements cost no more points, ReferrerPoints alone.
[cash outs will no longer cost rapidshare points, just refferrer points]
- The price points for accounts is expected at a later date easily be increased because the reduction to 5000 + 1 only to those with too little RefPoints should preclude this problem now and through the conversion option should be resolved. It is expected that for extensions of their own accounts then the same price as an alternative is available.
[in the future the price for creating a new premium account will rise again, the price of 5000 +1 was a "gift" for those with few reffererpoints who should be able gain more after this whole change. the same price can be paid to extend! your / a premium account]
- For 4 weeks are expected to account only points 1998 Free Rapid Points and NO RefPoints cost. This is to compensate for the confusion of the last few days thought.
[as a compensation for this confusion, during (the next?) 4 weeks, you can create accounts for 1998 premium free rapidshare points (+0 reffererpoints!)]

Czyli:
-1 pkt za 1x 100mb premium trafficu,
-2000 premium pointów można zamienić na 1 ref
-premium punkty będą mogłby być zamienione we free w przeliczniku 1:1
-Przy wypłacaniu kasy nie będą zabierane punkty, ale tylko refy
-przez 4 tygodnie będzie można wymienić 1998 pkt na konto premium, nie potrzebny będzie ref


jakby ktoś mógł przetłumaczyć :
-Traffic during Happy Hours will be calculated proportionately.
-in the future the price for creating a new premium account will rise again, the price of 5000 +1 was a "gift" for those with few reffererpoints who should be able gain more after this whole change. the same price can be paid to extend! your / a premium account]

pozdro

[ramal12]

Czyli:
-1 pkt za 1x 100mb premium trafficu,
-2000 premium pointów można zamienić na 1 ref
-premium punkty będą mogłby być zamienione we free w przeliczniku 1:1
-Przy wypłacaniu kasy nie będą zabierane punkty, ale tylko refy
-przez 4 tygodnie będzie można wymienić 1998 pkt na konto premium, nie potrzebny będzie ref

mam kilka pytań. jak zamienić 2000 prem pkt na 1 ref? gdzie można to zrobić bo jakoś nie mogę nigdzie się dowiedzieć.
jak można zamienić premium points na free points?

proszę o odpowiedź

[Robert]

mam kilka pytań. jak zamienić 2000 prem pkt na 1 ref? gdzie można to zrobić bo jakoś nie mogę nigdzie się dowiedzieć.
jak można zamienić premium points na free points?

proszę o odpowiedź

Jak rapid skończy wprowadzać zmiany wszystko będzie widoczne,

[ramal12]

okii, dzięki za odpowiedź. a tak w ogóle to kiedy rapid wprowadził promocyjną cenę na nowe konta premium? ma ona trwać przez 4 tygodnie lecz od kiedy jest?

[RufuS*]

Od wczoraj.

Działa wam upload? Bo mi nie bardzo:

- RapidUploader - pisze że wysłane ale pliku nigdzie nie ma
- RUM - pisze, że wysłane, plik jest na serwerze, ale niekompletny
- RSM - j.w.

Już mnie coś bierze...

[Xfire]

-przez 4 tygodnie będzie można wymienić 1998 pkt na konto premium

tzn że za 2k pkt będzie można mieć premiuma?

[RufuS*]

tzn że za 2k pkt będzie można mieć premiuma?

Dokładnie tak.

[salit21]

Ja mam pytanie a właściwie kilka co do tego nowego systemu bo już całkiem zgłupiałem
1. Jeśli chcę przedłużyć konto to te punkty sie sumują z free i premium??
2. Jak są naliczane te punkty (za co ile pktow)?
3. Jak to możliwe że średnio dziennie przez kilka miesięcy otrzymywałem po 300pktów a dziś nagle BUCH wpadło ponad 4000 !? Nie powiem ze mnie to nie cieszy ale ciekawi skąd taki przyrost - ostatnio nic nie uploadowałem (konto na osobiste potrzeby nie dla zarobku na kontach ).

[ramal12]

Ja mam pytanie a właściwie kilka co do tego nowego systemu bo już całkiem zgłupiałem
1. Jeśli chcę przedłużyć konto to te punkty sie sumują z free i premium??
2. Jak są naliczane te punkty (za co ile pktow)?
3. Jak to możliwe że średnio dziennie przez kilka miesięcy otrzymywałem po 300pktów a dziś nagle BUCH wpadło ponad 4000 !? Nie powiem ze mnie to nie cieszy ale ciekawi skąd taki przyrost - ostatnio nic nie uploadowałem (konto na osobiste potrzeby nie dla zarobku na kontach ).

a te 4000 pkt naliczyło ci do Premium RapidPoints czy do free?
Jeżeli do premium pkt to znaczy że ktoś kupił premium z twojego linku z plikiem.

[salit21]

Tak te 4000 doliczyło do Premium, ale czy te punkty jakoś się sumują gdybym chciał przedłużyć sobie konto?

[jackman]

podobno mozna wymieniac punkty free i punkty premium w stosunku 1:1 ( czy sa tyle samo warte), ale mozna tylko z premium na free, tylko nie wiem dokladnie jak

[salit21]

Może pod koniec każdego miesiąca sumują się te punkty?

[ramal12]

z tego co wiem te punkty same się nie zsumują. można je samemu zsumować do free points. nie wiadomo jednak jak. rapid jeszcze chyba wciąż nad tym pracuje.

[jackman]

za kilka dni bedzie mozna zamienic

a tak PS:
juz niedlugo bede mogl wyplacac kase

Dodano 26.08.2009 14:02:42:
na innym forum znalazlem takie cos:

Dostajesz 1250 punktów free za 1000 punktów premium, tu nizej wszystko jest, ale mi niepotrzebne, czekam na euro

Kod: Zaznacz wszystko

RapidShare API - Last updates and revision history on bottom of this document

This is the final technical documentation to the RapidShare API for coders.

If you are no programmer: Technical means, this documentation's purpose is solely to give coders (people creating cool tools) a documentation on how to
implement the back-end API in their tools, so their programs get even cooler and easier to be created, so you can use RapidShare even more comfortably.
If you know a good coder, do not hesitate to advise him or her of this documentation.

Since RapidShare is always extending its functionality, new routines will be added from time to time and existing routines will be adjusted slightly.
We will take care that existing routines will not be changed too much, so that existing programs keep running. Tell us if you are missing an API call
and we will see what we can do.

Routines giving back many values are subject of many changes. For example the routine getaccountdetails_v1 returns many key-value pairs. Those pairs
might be sorted differently in the future. Some values might disappear, new values may appear. Make sure your program can handle this changes without
a need for an update. If a value disappears, you should assume a "0" value. If a new value appears, your program should just ignore it. Your program
must not rely on the sort-order of the list.

In case we plan major adjustments, we will create a different function-call for it. This is reflected by the appendix "_v1" "_v2" etc. However, if there
are security issues by design in existing functions, we reserve the right to disable or change existing functions without prior notice. So check back
here from time to time.

WARNING: Since RapidShare serves a very large community, programming errors in popular tools might cause an unwanted DDOS attack to the RapidShare servers.
When programming tools, always keep in mind that your tool might be used by millions of people at the same time. So make sure you do not kill our API servers,
which might cause some big financial issues on your side. Always make sure your program STOPS retrying a failed request after 3 tries. Always make sure you
do not make more API calls than necessary. Our servers use a IP-based credit system, which will ban a IP making very many small requests or just a few
unnecessary big requests. Everything you do will add POINTS to your IP address. If you exceed a certain point limit, API calls are denied for 30 minutes.
If you exceed this limit multiple times, your account is banned as well. This especially happens with listfiles_v1 abuses on accounts having many files.
How many points your calls will add to your balance depend heavily on the routine you call. For example calling nextuploadserver_v1 adds nearly no points
to your balance, while listfiles_v1 is certainly the most expensive routine if you have many files in your account and you request a very detailed list.

http://api.rapidshare.com/cgi-bin/rsapi.cgi?sub=subroutine (finalpoints=points)
or https://api.rapidshare.com/cgi-bin/rsapi.cgi?sub=subroutine (finalpoints=points*2 (this means using SSL doubles points!))

Additional parameters can be added via http://api.rapidshare.com/cgi-bin/rsapi.cgi?sub=subroutine&param1=value1&param2=value2

In case you get an error, the reply always starts with "ERROR: " followed by a plain string telling you what is wrong. You should always check this.
The best is if you just output the string to the user. The string is self-explanatory and every user should know what went wrong.

Be careful when giving too many wrong passwords. The password brute-force protection will block your IP when you enter too many wrong passwords and/or killcodes.
This protection has nothing to do with the point system mentioned above and works independently.

Every routine taking "login,password,type" parameters also accepts the parameter "cookie". If you give "cookie=63AC34AA98443H....", RapidShare will decrypt
the cookie and overwrite the parameters "login,password,type" with the parameters stored in the encrypted cookie. this can be understood as a login override.



subroutine=nextuploadserver_v1
Description:   Gives the next available upload server to use without fearing rejection.
Parameters:   None
Reply fields:   1:The upload server. Complete it with rs$uploadserver.rapidshare.com
Reply format:   integer



subroutine=getapicpu_v1
Description:   Gives the CURRENT and MAX api cpu value for your IP address. If you reach MAX points, all further API requests from your IP will be blocked.
      Every minute the server will subtract 1000 points from your balance.
Parameters:   None
Reply fields:   1:How many points you already have. (CURRENT)
      2:How many points you may have before getting blocked. (MAX)
Reply format:   integer,integer



subroutine=checkincomplete_v1
Description:   You need this to resume an incomplete file. You can try without it, but you might get rejected if the file is invalid.
      This routine needs the file ID and the kill code for authentication.
Parameters:   fileid=The file ID in question
      killcode=The killcode of the file ID
Reply fields:   1:The size already saved on the server. You should use this to resume the upload, so you know where to start.
Reply format:   integer



subroutine=renamefile_v1
Description:   Renames a file to something else. Be aware that your users will not be able to download the file anymore by using the old link!
Parameters:   fileid=The file ID in question
      killcode=The killcode of the file ID
      newname=A new name for the file. Invalid characters will automatically be converted to "_"
Reply fields:   1:OK
Reply format:   string



subroutine=movefilestorealfolder_v1
Description:   Moves one or more files to a RealFolder. (files parameter limited to 10000 bytes)
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      files=comma separated list of file ids
      realfolder=ID of the RealFolder
Reply fields:   1:OK
Reply format:   string



subroutine=renamerealfolder_v1
Description:   Renames an existing RealFolder.
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      realfolder=ID of the RealFolder
      newname=New name of the RealFolder (limited to 100 chars.)
Reply fields:   1:OK
Reply format:   string



subroutine=deletefiles_v1
Description:   Deletes one or more files forever. (files parameter limited to 10000 bytes)
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      files=comma separated list of file ids, or ONE RealFolder ID. This deletes all files in the RealFolder ID
Reply fields:   1:OK
Reply format:   string



subroutine=addrealfolder_v1
Description:   Adds a new RealFolder
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      name=Name of the folder (Max. 100 byte)
      parent=ID of parent folder. 0=root
Reply fields:   1:RealFolder ID
      OR
      1:-1 (if no space left, it returns -1)
Reply format:   integer



subroutine=delrealfolder_v1
Description:   Deletes an existing RealFolder (without the files, so just the RealFolder entry)
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      realfolder=ID of the RealFolder
Reply fields:   1:OK
Reply format:   string



subroutine=moverealfolder_v1
Description:   Changes the parent ID of an existing RealFolder
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      realfolder=ID of the RealFolder
      newparent=New parent ID
Reply fields:   1:OK
Reply format:   string



subroutine=listfiles_v1
Description:   Lists all files in a given format in a given RealFolder or in all RealFolders. Warning: Flooding the server with this routine will block your IP!
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      realfolder=ID of the real folder to list files from. 0=root all=All folders
      filename=Optional. Give a filename to get only results where filename=$filename. Good for finding dupes.
      fileids=Optional. Give a comma-separated list of file IDs to get only results with the corresponding file IDs. fileids=1545615,1345154,215143
      fields=A comma separated list of database columns you want to receive. You will always receive the fileid.
         Example: fields=downloads,size will reply many lines in the format "$fileid,$downloads,$size\n"
         The following file columns are available: downloads,lastdownload,filename,size,killcode,serverid,type,x,y,realfolder,bodtype,killdeadline
         The following history columns are available: uploadtime,ip,md5hex
         Warning: History columns will always be appended after the file columns. Do NOT use them if you don't need to, since this will boost your points!
         Example: fields=size,filename,md5hex,killcode,ip,x,y will result in "$size,$filename,$killcode,$x,$y,$md5hex,$ip
         Format: Everything is human readable except timestamps, which are unix timestamps (integers).
      order=Reply will be ordered by this column. All file columns are valid. (optional. Avoid this parameter to pay less penalty points!)
      desc=0 or 1. 1 means, the result will be ordered descending. (optional)
Reply fields:   1:fileid
      2:dynamically adjusted
      OR
      "NONE" (if no results, it returns "NONE")
Reply format:   integer,fields (fields depending on fields you request)



subroutine=listrealfolders_v1
Description:   Returns all available RealFolders and their topology.
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
Reply fields:   1:RealFolder ID
      2:Parent RealFolder ID
      3:Name of the folder
      OR
      "NONE" (if no results, it returns NONE)
Reply format:   integer,integer,string



subroutine=getaccountdetails_v1
Description:   Returns key-pair values for the specific account. Warning: The order may change, and we will probably add or remove values in the future.
      You should make sure that your program does not stop working if new values appear or existing values disappear.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=password of the login
      withrefstring=1 (Optional. If given, the reply also contains refstring=STRING. You need this string to earn money. See FAQ for further information.)
      withcookie=1 (Optional. If given, the reply also contains cookie=STRING. You need this string only if you need to set a valid encryped cookie.)
Reply fields:   1:key 2:value
Reply format:   string=string or integer\n...
Reply example:   TYPE=PREM:
         accountid=$accountid (integer)
         type=$type (prem or col)
         servertime=$time (integer)
         addtime=$addtime (integer)
         validuntil=$validuntil (integer)
         username=$username (string)
         directstart=$directstart (integer)
         protectfiles=$protectfiles (integer)
         rsantihack=$rsantihack (integer)
         plustrafficmode=$plustrafficmode (integer)
         mirror=$mirror (string)
         mirror2=$mirror2 (string)
         mirror3=$mirror3 (string)
         jsconfig=$jsconfig (string)
         email=$email (string)
         lots=$lots (integer)
         points=$points (integer)
         curfiles=$curfiles (integer)
         curspace=$curspace (integer)
         bodkb=$bodkb (integer)
         prempoints=$prempoints (integer)
         premkbleft=$premkbleft (integer)
         ppointrate=$ppointrate (integer in cents)
         refstring=$refstring (string, optional. See 'withrefstring' above.)
         cookie=$cookie (string. optional. See 'withcookie' above.)
      TYPE=COL:
         accountid=$accountid (integer)
         type=$type (prem or col)
         servertime=$time (integer)
         addtime=$addtime (integer)
         username=$username (string)
         email=$email (string)
         jsconfig=$jsconfig (string)
         rsantihack=$rsantihack (integer)
         lots=$lots (integer)
         points=$points (integer)
         curfiles=$curfiles (integer)
         curspace=$curspace (integer)
         prempoints=$prempoints (integer)
         ppointrate=$ppointrate (integer in cents)
         refstring=$refstring (string, optional. See 'withrefstring' above.)
         cookie=$cookie (string. optional. See 'withcookie' above.)



subroutine=setaccountdetails_v1
Description:   Changes the settings of an account. Every parameter is mandatory except "newpassword". Thus, not transmitting a parameter means setting it to "".
      Enabled RSAntiHAck causes a block if you try to change email, username, password or plustrafficmode.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      newpassword=Sets a new password. Optional. Skipping this will not change the password at all.
      email=Email address to use. Mandatory. Skipping results in an error.
      username=Optional username to use. If skipped, the username alias will be deleted.
      mirror=2 character mirror in segment 1. Skipping results in random mirror selection. Ignored on type=col
      mirror2=2 character mirror in segment 2. Skipping results in random mirror selection. Ignored on type=col
      mirror3=2 character mirror in segment 3. Skipping results in random mirror selection. Ignored on type=col
      directstart=1 or 0. Downloads will start instantly. Skipping this means setting it to 0. Ignored on type=col
      jsconfig=A custom value, which can be set as you like. Max. 64 alphanumeric characters.
      plustrafficmode=Modes valid are 0=No auto conversion. 1=Only TrafficShare conversion. 2=Only RapidPoints conversion. 3=Both conversions available. Ignored on type=col
Reply fields:   1:OK
Reply format:   string



subroutine=enablersantihack_v1
Description:   Enabled the RS AntiHack mode. This mode is highly recommended for every account, as it makes account manipulations impossible without unlocking it first.
      Calling this routine gives an error if no valid e-mail has been saved by the user.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
Reply fields:   1:OK
Reply format:   string



subroutine=disablersantihack_v1
Description:   Disables the RS AntiHack mode, so the user can change the account settings again.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      unlockcode=The unlock code as seen in the e-mail sent by enablersantihack.
Reply fields:   1:OK
Reply format:   string



subroutine=sendrsantihackmail_v1
Description:   Sends the e-mail again containing the unlock code. It is the same e-mail as you called enablersantihack.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
Reply fields:   1:OK
Reply format:   string



subroutine=filemigrator_v1
Description:   Access to the powerful file migrator to move files between different accounts and account types. LinkLists also supported.
      Please notice that every transfer is logged. If you use this function to break the general user agreement, your account will be closed.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      srcaccount=Login of the source account
      srcpassword=Password of the source account
      srcrealfolder=The RealFolder ID to move in the source account. If given, only files in this RealFolder will be moved.
      targetaccount=Login of the target account
      targetpassword=Password of the target account
      targetrealfolder=The RealFolder ID in the target account. All files will be moved in this RealFolder in the target account.
      movetype=freecol OR freeprem OR colcol OR colprem OR premcol OR premprem OR llpremprem (premcol for example moves files from a premium account to a collector's account)
      fileids=What files to move. Either "*" for all files, or a comma separated list of file IDs.
         If movetype is freecol or freeprem, fileids has to be like: fileids=fFILEIDkKILLCODEfFILEIDkKILLCODE and (only then) it is limited to 100 files per run.
Reply fields:   IF MOVETYPE=LLPREMPREM
      1:Number of moved link lists
      ELSE
      1:Number of moved files
      2:Files in source account before action
      3:Space in source account before action
      4:Files in target account before action
      5:Space in target account before action
      6:Files in source account after action
      7:Space in source account after action
      8:Files in target account after action
      9:Space in target account after action
Reply format:   IF MOVETYPE=LLPREMPREM
      integer
      ELSE
      integer,integer,integer,integer,integer,integer,integer,integer,integer



subroutine=newlinklist_v1
Description:   Creates a new LinkList.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      foldername=The name of the new LinkList
      folderheadline=A headline for the new LinkList
      nickname=Your nick name to display in the LinkList view mode
      folderpassword=An optional folder password visitors have to enter before being able to browse your LinkList
Reply fields:   1:LinkList ID
Reply format:   string



subroutine=editlinklist_v1
Description:   Edits an existing LinkList. Keeping any value empty means deleting the value.
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      folderid=The ID of the existing LinkList
      foldername=The new name of the LinkList
      folderheadline=A new headline for the LinkList
      nickname=A new nick name to display in the LinkList view mode
      folderpassword=An optional folder password visitors have to enter before being able to browse your LinkList
Reply fields:   1:OK
Reply format:   string



subroutine=getlinklist_v1
Description:   Receives a full list of all available link lists OR details about a specific link list. WARNING: Reply separator is a " instead of a comma!
Parameters:   type=col or prem (Collector's account or Premium account.)
      login=ID or username
      password=Password of the login
      folderid=LinkList ID. Set this to receive the first reply field group. Do not set this to receive the second reply field group.
      withsubfolders=1 gives also all sub-folders if folderid is empty.
Reply fields:   1:Subfolder ID (string)
      2:File ID (integer)
      3:Filename (string)
      4:Size (integer in bytes)
      5:Description (string)
      6:Addtime (unix timestamp)
      OR (if folderid is empty):
      1:Folder ID (string)
      2:Name (string)
      3:Headline (string)
      4:Views (integer)
      5:Last view (unix timestamp)
      6:Folder password (string)
      7:Nick (string)
Reply format:   string"integer"string"integer"string"integer\n...
      OR (if folderid is empty)
      string"string"string"integer"integer"string"string\n...



subroutine=copyfilestolinklist_v1
Description:   Copys several files to the given LinkList. Please notice that the files are not copied, but a link entry is generated in the LinkList pointing to the respective file.
      It takes the size and the filename and saves it in the link-list for every file ID you provide. Please notice that the files have to be in your respective zone
      in order to be copied to your LinkList.
Parameters:   type=col or prem
      login=ID or username
      password=Password of the login
      folderid=The folder ID to copy the files to
      subfolderid=The sub-folder ID to copy the files to (0=root, default is 0)
      files=A comma separated list of file IDs
Reply fields:   1:OK
Reply format:   string



subroutine=newlinklistsubfolder_v1
Description:   Creates a new LinkList sub-folder.
Parameters:   type=col or prem
      login=ID or username
      password=Password of the login
      folderid=The folder ID to create the entry in
      subfolderid=The sub-folder ID to create the entry in
      newsubfoldername=A reasonable sub-folder name
      newsubfolderpassword=An optional numeric access password for that sub-folder.
      newsubfolderdescription=An optional description
Reply fields:   1:New sub-folder ID
Reply format:   string



subroutine=deletelinklist_v1
Description:   Deletes an existing LinkList. Please notice that it will not delete the files itself, just the LinkList alone.
Parameters:   type=col or prem
      login=ID or username
      password=Password of the login
      folderid=The folder ID to delete
Reply fields:   1:OK
Reply format:   string



subroutine=deletelinklistentries_v1
Description:   Deletes LinkList entries. Also supports deleting sub folders. Be careful that it is possible to delete sub-folders without deleting the links itself!
      A messed up LinkList can always be completely deleted with deletelinklist_v1.
Parameters:   type=col or prem
      login=ID or username
      password=Password of the login
      folderid=The folder ID to delete entries from
      subfolderid=The sub-folder ID to delete entries from. Defaults to 0 (root).
      files=The comma-separated file IDs to delete. Notice that sub-folders are file IDs less than 1000.
Reply fields:   1:OK
Reply format:   string



subroutine=editlinklistentry_v1
Description:   Edits a LinkList entry. If length of file ID is <= 3, it is a folder and you may edit description and password. If it is >= 4, it is a file and you may only change the description.
Parameters:   type=col or prem
      login=ID or username
      password=Password of the login
      folderid=The folder ID containing the file-id
      subfolderid=The sub-folder ID containing the file-id. Defaults to 0 (root).
      fileid=The file ID to modify.
      newdescription=The new description of the file or sub LinkList.
      newpassword=The new access password of the sub LinkList. Only valid if you edit a sub LinkList.
Reply fields:   1:OK
Reply format:   string



subroutine=trafficsharetype_v1
Description:   Sets a new TrafficShare type for a list of files. (files parameter limited to 10000 bytes)
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      files=comma separated list of file ids
      trafficsharetype=0,1,2,101,102 (0=off 1=on 2=on with encryption 101=on with logging 102=on with logging and encryption (101 and 102 require a verified premium account))
Reply fields:   1:OK
Reply format:   string



subroutine=masspoll_v1
Description:   Saves your vote on a running mass poll.
Parameters:   type=col or prem (Collector's account or Premium account)
      login=ID or username
      password=password of the login
      pollid=ID of the poll
      a1=Your vote for question 1 (number between 1 and 99)
      a2=Your vote for question 2 (number between 1 and 99)
      a3=Your vote for question 3 (number between 1 and 99)
      a4=Your vote for question 4 (number between 1 and 99)
      a5=Your vote for question 5 (number between 1 and 99)
Reply fields:   1:OK
Reply format:   string



subroutine=checkfiles_v1
Description:   Gets status details about a list of given files. (files parameter limited to 10000 bytes. filenames parameter limited to 100000 bytes.)
Parameters:   files=comma separated list of file ids
      filenames=comma separated list of the respective filename. Example: files=50444381,50444382 filenames=test1.rar,test2.rar
      incmd5=if set to 1, field 7 is the hex-md5 of the file. This will double your points! If not given, all md5 values will be 0
Reply fields:   1:File ID
      2:Filename
      3:Size (in bytes. If size is 0, this file does not exist.)
      4:Server ID
      5:Status integer, which can have the following values:
         0=File not found
         1=File OK (Downloading possible without any logging)
         2=File OK (TrafficShare direct download without any logging)
         3=Server down
         4=File marked as illegal
         5=Anonymous file locked, because it has more than 10 downloads already
         6=File OK (TrafficShare direct download with enabled logging. Read our privacy policy to see what is logged.)
      6:Short host (Use the short host to get the best download mirror: http://rs$serverid$shorthost.rapidshare.com/files/$fileid/$filename)
      7:md5 (See parameter incmd5 in parameter description above.)
Reply format:   integer,string,integer,integer,integer,string,string



subroutine=trafficsharelogs_v1
Description:   Gets detailed download logs for your offered TrafficShare files. To make this work, you first have to enable logging for the respective TrafficShare files.
      No logs are generated by default.
Parameters:   type=col or prem (Collector's account senseless here)
      login=ID or username
      password=password of the login
      fileid=ID of the file
Reply fields:   1: Start time, unix timestamp
      2: Stop time, unix timestamp (You can easily calculate the download speed. If this is 0, then the client is still downloading.)
      3: Size of the whole file in bytes
      4: Starting position of the download
      5: How many bytes the client has really downloaded
      6: Range parameter. Download-accelerators might give those parameters.
      7: Custom parameter. You can include information in the download link, like the customer ID or billing informations. Those can be tracked here as well.
Reply format:   integer"integer"integer"integer"integer"string"string (the separator here is ", because the last two values may contain commas!)



subroutine=trafficsharebandwidth_v1
Description:   You can see how much bandwidth all your offered TrafficShare files have been used. This means, in case you want to host your files on your own servers, you need this bandwidth.
Parameters:   type=col or prem (Collector's account senseless here)
      login=ID or username
      password=password of the login
      starttime=Start time to get logs for, unix timestamp
      endtime=End time to get logs for, unix timestamp (you will never get more than 1000 records. Reply is "ORDER BY starttime LIMIT 1000")
Reply fields:   1: Unix timestamp (You will get timestamp intervals every 10 minutes. Holes WILL exist if you use less than 1 MBit (128 KB/sec) or if we experience server problems.)
      2: KB/sec (How many KB/sec you have used in the past 10 minutes.)
Reply format:   integer,integer



subroutine=buylots_v1
Description:   Exchanges RapidPoints to lots. You will get one lot for 50 RapidPoints. You can not own more than 50.000 lots.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
      newlots=How many new lots to buy
Reply fields:   1: Number of lots you have now. (old+new)
Reply format:   integer



subroutine=sendmail_v1
Description:   You may send an e-mail to someone to inform him/her about a file you have just uploaded. E-mail sending is restricted and has several anti-spam methods included.
Parameters:   name=YOUR name
      comment=A comment you want to attach to your e-mail. HTML will be filtered.
      email1=First e-mail address to send to
      email2=Second e-mail address (optional)
      email3=Third e-mail address (optional)
      withkillcode1=1 means that e-mail #1 will also receive the delete links for the files. Optional.
      withkillcode2=1 optional
      withkillcode3=1 optional
      fileid1=File ID 1 to inform the receiver about
      killcode1=The killcode for fileid1 (required)
      fileidX=Same as above. Supported up to fileid10.
      killcodeX=Supported up to killcode10.
Reply fields:   1: OK
Reply format:   string



subroutine=premiumzonelogs_v1
Description:   Downloads the log files from your premium zone. Thus which IP network has downloaded how much data on what day from your premium account. Ordered by date descending.
Parameters:   login=ID or username
      password=password of the login
Reply fields:   1: date (YYYY-MM-DD)
      2: ipnet (10.10.0.XXX)
      3: dlkb (How many Kilobytes you have downloaded)
Reply format:   string,string,integer\nstring,string,integer\nstring,string,integer\nstring,string,integer\n...



subroutine=getreward_v1
Description:   Gets details about your ordered RapidShare reward. You can only have one pending reward active at the same time.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
Reply fields:   1: Reward-ID
      2: AddTime (Unix timestamp)
      3: E-Mail address saved when ordered this reward.
      4: Active PPointRate (PPointRate: How many CENT you get for 1000 Premium RapidPoints.)
      5: Parameters. This is a text-block of data needed to deliver the reward, which has been saved as well via setreward_v1.
Reply format:   integer,integer,string,integer\nseveral lines of text data



subroutine=setreward_v1
Description:   Saves details about your ordered RapidShare reward. You can only have one pending reward active at the same time.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
      reward=integer (1-255) of the reward ID.
      parameters=A multi-line textblock with max. 3000 characters, which can be read by getreward_v1. Suspicious characters will be filtered.
Reply fields:   1: OK
Reply format:   string



subroutine=getpointlogs_v1
Description:   Gets details about your earned RapidPoints. You can see how many RapidPoints you have earned on which day. Max. 90 days in the past.
      Due to the complexity of this process, you can't see the points of the current day.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
Reply fields:   1: Date (ordered by date descending "YYYY-MM-DD")
      2: fpoints (Free RapidPoints earned through free users)
      3: ppoints (Premium RapidPoints earned through premium users. Example: 24.06)
Reply format:   string,integer,float



subroutine=getreferrerlogs_v1
Description:   You can see how many Premium RapidPoints you have earned on which day. Max. 1000 entries will be displayed.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
Reply fields:   1: addtime (unix timestamp. entries ordered by addtime descending)
      2: ppoints (how many Premium-RapidPoints you got by this new customer)
      3: byfileid (the referrer File-ID. This is 0 if the customer used a REFLINK instead.)
Reply format:   integer,integer,integer



subroutine=ppointstofpoints_v1
Description:   Exchanges your Premium RapidPoints to Free RapidPoints. Exchange rate may vary. Right now you get 1250 fpoints for 1000 ppoint.
Parameters:   type=col or prem
      login=ID or username
      password=password of the login
      takeppoints=how many ppoints you wish to exchange to fpoints. Minimum is 1000. The really exchanged points may be lower than specified.
Reply fields:   1: ppoints (how many ppoints you lost)
      2: fpoints (how many fpoints you got)
Reply format:   integer,integer



Revision history (entries refering to functions being removed after just a few days will be removed here as well to keep the history clean)
===========================================================================================================================================
25.05.2009
   - Introduction of the revision history
   - trafficsharelogs_v1,trafficsharebandwidth_v1: actually make them work as they should....
   - trafficsharelogs_v1: range and custom parameter added
   - checkfiles_v1: status values re-formatted and value 6 added

30.05.2009
   - getaccountdetails_v1: Possibility to earn money added. Thus, referers added, new parameter withrefstring added.

01.06.2009
   - getaccountdetails_v1: referers changed to refpoints. Possibility for collector's users to earn money added. refpoints and refstring added there as well.

04.06.2009
   - premiumzonelogs_v1 added
   - getapicpu_v1: Now permanent. MAX value added.

05.06.2009
   - filemigrator_v1: acceptfee added. File migrator not free anymore due to massive abuse.

08.06.2009
   - getaccountdetails_v1: withcookie added. If you need to set the new encrypted cookie, this string will include cookie=STRING in the reply.

14.06.2009
   - getreward_v1 and setreward_v1 added.

22.06.2009
   - global: Support for encrypted API login added via global override parameter cookie=HEXSTRING

25.06.2009
   - getaccountdetails_v1: reply field "type" added.

01.07.2009
   - getaccountdetails_v1: prempoints always returns 0. It will be removed shortly!

06.07.2009
   - getaccountdetails_v1: prempoints now removed. refrate added.
   - getpointlogs_v1: added function
   - getreferrerlogs_v1: added function

15.07.2009
   - listfiles_v1: killdeadline added

16.07.2009
   - listfiles_v1: now takes new optional parameter "fileids"

06.08.2009
   - getlinklist_v1: Internal bug-fixes and changed reply separator from , to " and reply is no longer HTML encoded.

11.08.2009
   - getreward_v1: Reply changed. Points removed.

17.08.2009
   - filemigrator_v1: acceptfee removed. Fee removed completely.
   - masspoll_v1: vote changed to a1...a5 to enable possibility of surveys.

19.08.2009
   - getaccountdetails_v1: points renamed to fpoints. ppoints added. "points=0" added to avoid broken applications.
   - getpointlogs_v1: ppoints changed from integer to float.

21.08.2009
   - ppointstorefpoints_v1: added function

22.08.2009
   - ppointstorefpoints_v1: changed reply
   - ppointstofpoints_v1: added function

24.08.2009
   - getaccountdetails_v1: refrate changed to ppointrate, refpoints removed.
   - getreferrerlogs_v1: refpoints changed to ppoints
   - ppointstorefpoints_v1: function removed
   - getreward_v1: refrate changed to ppointrate


[Meru]

Ale farta dzisiaj miałem Ktoś kupił z moich linków konto na rok od Rapida i dostałem 20000 Premium-RapidPoints xD

[jackman]

przez program RUM: rapidshare Upload Manager mozna zobaczyc przez ktore twoj plik zostalo kupione to konto, tez kiedys dostalem 20euro czyli te 20 000pkt ale juz nie moge sprawdzic z jakiego pliku bo padł...

Dodano 26.08.2009 21:41:10:

Kod: Zaznacz wszystko

Premium-RapidPoints are required for some of our rewards and for creating free Premium Accounts.

Czyli jak sie skonczy promocja to trzeba bedzie miec premium rapidpoints aby wymienic na 30 dniowe konta

[januaryy]

Hej a znacie może jakieś gotowe działające skrypty rs2rs na www?

[RufuS*]

Co Wy macie z tym rs2rs? Ładnie to tak kraść cudze linki? Kupcie se shella z obsługą SSH i możecie kopiować ile wlezie...